ELD Integration | Verizon Reveal

Topic:

How to Import Verizon Reveal Data Into RapidLog.

Verizon Reveal:

  • Arguments:
    • /provider (VerizonReveal)
    • /companycode (RLCompany Code)
    • /username (VerizonReveal username)
    • /password (VerizonReveal password)
    • /appid (VerizonReveal App ID. Instructions on how to obtain this below.)
    • /driverid (Driver ID of a specific driver. Should be used with /from and /to flags)
    • /from (Date format yyyy-mm-dd)
    • /to (Date format yyyy-mm-dd)
    • /daysback (defaults to 1)

  • Advanced Arguments:
    • /debug 1
      • /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
    • /ui 1
      • /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
    • /fm 1
      • /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
    • /pause 1
      • /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.

  • C:\Windows\RL5.ini Settings (optional):
    • [Directories]
      EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
    • Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode

  • Example BAT File for All Companies and Providers (prefered method):
    • “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI

  • Example BAT File for a Single Company and Provider:
    • “C:\Program Files (x86)\RapidLog\EobrDownloader.exe” /provider VerizonReveal /companycode MYRLCOMPANY /username VerizonRevealusername /password VerizonRevealpassword /appid VerizonRevealappid /daysback 8
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Obtaining the App ID:

Verizon Connect Reveal integration setup:
  1. Call Verizon’s customer care line.
  2. Request Account Integration which should send the case up to the App Dev group.
  3. Verizon’s App Dev team will then ok the integration and pass the details back down to Tier 1 support who will contact you with the details.  This usually takes 2 to 3 days.
  4. If this does not include a set of credentials for use by our downloader then request a new login/password pair for that.
  5. Provide RapidLog with the credentials so we can log in and create the needed App ID and register our app for that customer.
    1. The easiest way to do this is the start a Live Chat
    2. The App ID can be generated at: https://fim.us.fleetmatics.com/#/home/login
      1. Full instructions at: http://fim.us.fleetmatics.com/content/home/support/index.htm
That should be all that is needed for use to get the downloader configured. However, depending on the App Dev group at Verizon there may be more involved to get it working. You may have to contact Verizon after generating the App ID to get them to unlock the HOS data request.

Instructions:

  1. Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
  2. Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
    • Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
  3. Open Notepad and setup the download, import and audit.  Save that file as a .bat file.
  4. Open Task Scheduler and schedule the .bat file to run once or twice daily.

ELD Integration | Pedigree

Topic:

How to Import Pedigree ELD Data Into RapidLog.

Pedigree:

  • Arguments:
    • /provider (Pedigree)
    • /companycode (RLCompany Code)
    • /username (Pedigree username)
    • /password (Pedigree password)
    • /driverid (Driver ID of a specific driver. Should be used with /from and /to flags)
    • /from (Date format yyyy-mm-dd)
    • /to (Date format yyyy-mm-dd)
    • /daysback (defaults to 1)

  • Advanced Arguments:
    • /debug 1
      • /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
    • /ui 1
      • /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
    • /fm 1
      • /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
    • /pause 1
      • /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.

  • C:\Windows\RL5.ini Settings (optional):
    • [Directories]
      EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
    • Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode

  • Example BAT File for All Companies and Providers (prefered method):
    • “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI

  • Example BAT File for a Single Company and Provider:
    • “C:\Program Files (x86)\RapidLog\EobrDownloader.exe” /provider Pedigree /companycode MYRLCOMPANY /username Pedigreeusername /password Pedigreepassword /daysback 8
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

  1. Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
  2. Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
    • Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
  3. Open Notepad and setup the download, import and audit.  Save that file as a .bat file.
  4. Open Task Scheduler and schedule the .bat file to run once or twice daily.

ELD Integration | NexTraq

Topic:

How to Import NexTraq ELD Data Into RapidLog.

NexTraq:

  • Arguments:
    • /provider (NexTraq)
    • /companycode (RLCompany Code)
    • /username (NexTraq username)
    • /password (NexTraq password)
    • /driverid (Driver ID of a specific driver. Should be used with /from and /to flags)
    • /from (Date format yyyy-mm-dd)
    • /to (Date format yyyy-mm-dd)
    • /daysback (defaults to 1)

  • Advanced Arguments:
    • /debug 1
      • /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
    • /ui 1
      • /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
    • /fm 1
      • /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
    • /pause 1
      • /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.

  • C:\Windows\RL5.ini Settings (optional):
    • [Directories]
      EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
    • Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode

  • Example BAT File for All Companies and Providers (prefered method):
    • “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI

  • Example BAT File for a Single Company and Provider:
    • “C:\Program Files (x86)\RapidLog\EobrDownloader.exe” /provider Nextraq /companycode MYRLCOMPANY /username NexTraqusername /password NexTraqpassword /daysback 8
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

  1. Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
  2. Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
    • Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
  3. Open Notepad and setup the download, import and audit.  Save that file as a .bat file.
  4. Open Task Scheduler and schedule the .bat file to run once or twice daily.

ELD Integration | ERoad

Topic:

How to Import ERoad ELD Data Into RapidLog.

ERoad:

  • Arguments:
    • /provider (ERoad)
    • /companycode (RLCompany Code)
    • /apikey (ERoad API Key)
    • /from (yyyy-mm-dd format)
    • /to (yyyy-mm-dd format)
    • /daysback (defaults to 1)

  • Advanced Arguments:
    • /debug 1
      • /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
    • /ui 1
      • /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
    • /fm 1
      • /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
    • /pause 1
      • /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.

  • C:\Windows\RL5.ini Settings (optional):
    • [Directories]
      EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
    • Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode

  • Example BAT File for All Companies and Providers (prefered method):
    • “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI

  • Example BAT File for a Single Company and Provider:
    • “C:\Program Files (x86)\RapidLog\EobrDownloader.exe” /provider ERoad /companycode MYRLCOMPANY /apikey ERoadapikey /daysback 8
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

  1. Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
  2. Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
    • Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
  3. Open Notepad and setup the download, import and audit.  Save that file as a .bat file.
  4. Open Task Scheduler and schedule the .bat file to run once or twice daily.

RapidLog ELD XML Format

Topic:

How do I format an ELD file to import into RapidLog?

File Format:

Must be saved as a .xml file.

Layout:

<RapidLog_eLogs>
<elog>
<driver/>
<duty_status_points>
<point/>
</duty_status_points>
<day_events>
<miles/>
</day_events>
</elog>
</RapidLog_eLogs>

Fields:

driver: *idnumber, *clear_from, *clear_to
duty_status_points: *timezone
point: *status, *timestamp, odometer, location, latitude, longitude, remark1, remark2
day_events: timezone
miles: timestamp, distance

*Indicates a mandatory field
Note: If using odometer values in the points RapidLog will calculate the distance on the day based on the odometer values. Do not use both the miles field and the odometer field. Pick one or the other.

Download Sample File:

Sample:

<?xml version=”1.0″?>
<RapidLog_eLogs>
<elog>
<driver idnumber=”4433″ clear_from=”11/01/2019 12:00 AM” clear_to=”11/10/2019 11:59:59 PM”/>
<duty_status_points timezone=”GMT”>
<point status=”1″ timestamp=”11/01/2019 06:00:00″ odometer=”0″ location=”” latitude=”” longitude=”” remark1=”” remark2=””/>
<point status=”4″ timestamp=”11/01/2019 15:14:00″ odometer=”0″ location=”Florence, SC” latitude=”34.216016″ longitude=”-79.798976″ remark1=”” remark2=””/>
<point status=”3″ timestamp=”11/01/2019 15:16:00″ odometer=”0″ location=”Florence, SC” latitude=”34.21604″ longitude=”-79.799″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/01/2019 21:30:00″ odometer=”0″ location=”Savannah, GA” latitude=”31.984486″ longitude=”-81.224424″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/02/2019 00:13:00″ odometer=”0″ location=”Savannah, GA” latitude=”31.984564″ longitude=”-81.224344″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/02/2019 01:27:00″ odometer=”0″ location=”Yemassee, SC” latitude=”32.800844″ longitude=”-80.770312″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/02/2019 06:00:00″ odometer=”0″ location=”” latitude=”” longitude=”” remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/02/2019 22:09:00″ odometer=”0″ location=”Warsaw, NC” latitude=”34.994248″ longitude=”-78.129352″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/02/2019 22:17:00″ odometer=”0″ location=”Warsaw, NC” latitude=”34.994456″ longitude=”-78.129184″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/02/2019 22:18:00″ odometer=”0″ location=”Warsaw, NC” latitude=”34.99388″ longitude=”-78.128992″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/02/2019 22:22:00″ odometer=”0″ location=”Warsaw, NC” latitude=”34.994852″ longitude=”-78.129624″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/03/2019 06:00:00″ odometer=”0″ location=”” latitude=”” longitude=”” remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/03/2019 13:02:00″ odometer=”0″ location=”Warsaw, NC” latitude=”34.99532″ longitude=”-78.12992″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/03/2019 13:08:00″ odometer=”0″ location=”Warsaw, NC” latitude=”34.993952″ longitude=”-78.128968″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/03/2019 21:45:00″ odometer=”0″ location=”Mebane, NC” latitude=”36.067728″ longitude=”-79.314″ remark1=”” remark2=””/>
<point status=”3″ timestamp=”11/03/2019 22:09:00″ odometer=”0″ location=”Mebane, NC” latitude=”36.067768″ longitude=”-79.313912″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/03/2019 23:45:00″ odometer=”0″ location=”Statesville, NC” latitude=”35.812604″ longitude=”-80.834392″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/04/2019 07:00:00″ odometer=”0″ location=”” latitude=”” longitude=”” remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/04/2019 15:05:00″ odometer=”0″ location=”Statesville, NC” latitude=”35.812632″ longitude=”-80.83436″ remark1=”” remark2=””/>
<point status=”4″ timestamp=”11/04/2019 22:53:00″ odometer=”0″ location=”Dandridge, TN” latitude=”36.038376″ longitude=”-83.444112″ remark1=”” remark2=””/>
<point status=”3″ timestamp=”11/04/2019 22:58:00″ odometer=”0″ location=”Dandridge, TN” latitude=”36.037668″ longitude=”-83.44448″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/05/2019 00:28:00″ odometer=”0″ location=”Crab Orchard, TN” latitude=”35.928152″ longitude=”-84.912792″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/05/2019 01:00:00″ odometer=”0″ location=”Crab Orchard, TN” latitude=”35.928212″ longitude=”-84.91288″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/05/2019 01:58:00″ odometer=”0″ location=”Lancaster, TN” latitude=”36.139584″ longitude=”-85.806456″ remark1=”” remark2=””/>
<point status=”4″ timestamp=”11/05/2019 18:42:00″ odometer=”0″ location=”Pembroke, KY” latitude=”36.679664″ longitude=”-87.404888″ remark1=”” remark2=””/>
<point status=”3″ timestamp=”11/05/2019 19:06:00″ odometer=”0″ location=”Oak Grove, KY” latitude=”36.679908″ longitude=”-87.404648″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/05/2019 20:26:00″ odometer=”0″ location=”Paducah, KY” latitude=”37.05136″ longitude=”-88.65396″ remark1=”” remark2=””/>
<point status=”3″ timestamp=”11/05/2019 21:44:00″ odometer=”0″ location=”Paducah, KY” latitude=”37.05136″ longitude=”-88.653968″ remark1=”” remark2=””/>
<point status=”4″ timestamp=”11/06/2019 01:48:00″ odometer=”0″ location=”Mountain View, MO” latitude=”37.001832″ longitude=”-91.70756″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/06/2019 01:56:00″ odometer=”0″ location=”Mountain View, MO” latitude=”37.00188″ longitude=”-91.707″ remark1=”” remark2=””/>
<point status=”3″ timestamp=”11/06/2019 21:28:00″ odometer=”0″ location=”Springfield, MO” latitude=”37.31216″ longitude=”-93.33012″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/06/2019 22:10:00″ odometer=”0″ location=”Collins, MO” latitude=”37.874824″ longitude=”-93.621528″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/06/2019 22:10:00″ odometer=”0″ location=”Collins, MO” latitude=”37.874824″ longitude=”-93.621528″ remark1=”Fueling” remark2=””/>
<point status=”3″ timestamp=”11/06/2019 22:26:00″ odometer=”0″ location=”Collins, MO” latitude=”37.874816″ longitude=”-93.621536″ remark1=”” remark2=””/>
<point status=”4″ timestamp=”11/07/2019 01:27:00″ odometer=”0″ location=”Dearborn, MO” latitude=”39.471544″ longitude=”-94.787424″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/07/2019 01:36:00″ odometer=”0″ location=”Dearborn, MO” latitude=”39.475576″ longitude=”-94.786744″ remark1=”” remark2=””/>
<point status=”3″ timestamp=”11/07/2019 02:17:00″ odometer=”0″ location=”Dearborn, MO” latitude=”39.475568″ longitude=”-94.786752″ remark1=”” remark2=””/>
<point status=”3″ timestamp=”11/07/2019 18:54:00″ odometer=”0″ location=”Elm Creek, NE” latitude=”40.692252″ longitude=”-99.381416″ remark1=”” remark2=””/>
<point status=”4″ timestamp=”11/07/2019 20:00:00″ odometer=”0″ location=”North Platte, NE” latitude=”41.098296″ longitude=”-100.682936″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/07/2019 20:51:00″ odometer=”0″ location=”Ogallala, NE” latitude=”41.119618″ longitude=”-101.603583″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/08/2019 07:00:00″ odometer=”0″ location=”” latitude=”” longitude=”” remark1=”” remark2=””/>
<point status=”4″ timestamp=”11/08/2019 13:59:00″ odometer=”0″ location=”Elk Mountain, WY” latitude=”41.630846″ longitude=”-106.285147″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/08/2019 17:30:00″ odometer=”0″ location=”Little America, WY” latitude=”41.545549″ longitude=”-109.856685″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/09/2019 07:00:00″ odometer=”0″ location=”” latitude=”” longitude=”” remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/09/2019 11:43:00″ odometer=”0″ location=”Caldwell, ID” latitude=”43.661884″ longitude=”-116.654114″ remark1=”” remark2=””/>
<point status=”1″ timestamp=”11/09/2019 14:14:00″ odometer=”0″ location=”La Grande, OR” latitude=”45.297025″ longitude=”-118.043629″ remark1=”Fueling” remark2=””/>
<point status=”1″ timestamp=”11/10/2019 07:00:00″ odometer=”0″ location=”” latitude=”” longitude=”” remark1=”” remark2=””/>
</duty_status_points>
<day_events timezone=”GMT”>
<miles timestamp=”11/01/2019 00:00:00″ distance=”251″/>
<miles timestamp=”11/02/2019 00:00:00″ distance=”372″/>
<miles timestamp=”11/03/2019 00:00:00″ distance=”261″/>
<miles timestamp=”11/04/2019 00:00:00″ distance=”413″/>
<miles timestamp=”11/05/2019 00:00:00″ distance=”385″/>
<miles timestamp=”11/06/2019 00:00:00″ distance=”34″/>
<miles timestamp=”11/06/2019 00:00:00″ distance=”378″/>
<miles timestamp=”11/07/2019 00:00:00″ distance=”327″/>
</day_events>
</elog>
</RapidLog_eLogs>

Local Log Import Format

Topic:

How do I Import Local Logs from a Text File?

Layout:

You will format the CSV file in the following way:

Driver ID, Timestamp, Status

  • Driver ID:
    • Must match the Primary ID in RapidLog
  • Timestamp:(mm/dd/yyyy hh:mm(am/pm))
    • 09/10/2019 05:15pm
    • 09/10/2019 17:15
  • Status:
    • 1 or 4 (1 = Off Duty, 4 = On Duty)
    • In or Out
    • On or Off
  • Violations – 0 or more columns
    • ClassSubClass in each column

CSV File Format Examples:

“123”,”01/11/2019 12:00am”,”In”
“123”,”01/11/2019 03:30pm”,”Out”
“123”,”01/11/2019 16:30″,”ON”
“123”,”01/12/2019 02:00″,”OFF”
“234”,”01/12/2019 01:01″,”1″,”v1″,”u4″,”s3″
“234”,”01/12/2019 03:12″,”4″,”r2″

File Import Instructions:

  1. Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
    • Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
  2. The local log import file has to be saved as a .CSV file
  3. In the company data folder you will need to create a folder named EclipseLocal
  4. Copy your local log .CSV file to the RapidLog\Data\Company\EclipseLocal folder
  5. To import the local log .CSV file run the following command:
    • “C:\Program Files (x86)\RapidLog\RapidLog.exe” RLCompanyCode -L EclipseLocalFormat

ELD Integration | Titan

Topic:

How to Import Titan ELD Data Into RapidLog.

Titan:

  • Arguments:
    • /provider (Titan)
    • /companycode (RL Company Code)
    • /username (Titan Username)
    • /password (Titan Password)
    • /from (defaults to now – 1 day. 89 days back maximum. YYYY-MM-DD format)
    • /daysback (defaults to 1)

  • Advanced Arguments:
    • /debug 1
      • /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
    • /ui 1
      • /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
    • /fm 1
      • /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
    • /pause 1
      • /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.

  • C:\Windows\RL5.ini Settings (optional):
    • [Directories]
      EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
    • Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode

  • Example BAT File for All Companies and Providers (prefered method):
    • “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI

  • Example BAT File for a Single Company and Provider:
    • “C:\Program Files (x86)\RapidLog\EobrDownloader.exe” /provider Titan /companycode MYRLCOMPANY /username Titanusername /password Titanpassword /daysback 8
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

  1. Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
  2. Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
    • Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
  3. Open Notepad and setup the download, import and audit.  Save that file as a .bat file.
  4. Open Task Scheduler and schedule the .bat file to run once or twice daily.

ELD Integration | Trimble

Topic:

How to Import Trimble ELD Data Into RapidLog.

Trimble:

  • Arguments:
    • /provider (Trimble)
    • /companycode (RLCompany Code)
    • /apikey (Trimble API Key)
    • /from (defaults to now – 1 day. 89 days back maximum. YYYY-MM-DD format)
    • /daysback (defaults to 1)

  • Advanced Arguments:
    • /debug 1
      • /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
    • /ui 1
      • /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
    • /fm 1
      • /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
    • /pause 1
      • /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.

  • C:\Windows\RL5.ini Settings (optional):
    • [Directories]
      EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
    • Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode

  • Example BAT File for All Companies and Providers (prefered method):
    • “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI

  • Example BAT File for a Single Company and Provider:
    • “C:\Program Files (x86)\RapidLog\EobrDownloader.exe” /provider Trimble /companycode MYRLCOMPANY /apikey TrimbleAPIkey /daysback 8
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

  1. Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
  2. Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
    • Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
  3. Open Notepad and setup the download, import and audit.  Save that file as a .bat file.
  4. Open Task Scheduler and schedule the .bat file to run once or twice daily.

ELD Integration | Teletrac Navman

Topic:

How to Import Teletrac Navman ELD Data Into RapidLog.

Teletrac Navman:

  • Arguments:
    • /provider (Teletrac_Navman)
    • /companycode (RLCompany Code)
    • /username (Teletrac_Navman Username)
    • /password (Teletrac_Navman Password)
    • /daysback (defaults to 1)
    • /from (defaults to now – 1 day. Date format yyyy-mm-dd )

  • Advanced Arguments:
    • /debug 1
      • /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
    • /ui 1
      • /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
    • /fm 1
      • /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
    • /pause 1
      • /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.

  • C:\Windows\RL5.ini Settings (optional):
    • [Directories]
      EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
    • Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode

  • Example BAT File for All Companies and Providers (prefered method):
    • “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI

  • Example BAT File for a Single Company and Provider:
    • “C:\Program Files (x86)\RapidLog\EOBRDownloader.exe” /provider Teletrac_Navman /companycode MYRLCOMPANY /username Teletrac_NavmanUsername /password Teletrac_NavmanPass /daysback 8
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

  1. Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
  2. Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
    • Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
  3. Open Notepad and setup the download, import and audit.  Save that file as a .bat file.
  4. Open Task Scheduler and schedule the .bat file to run once or twice daily.

ELD Integration | Teletrac Fleet Director

Topic:

How to Import Teletrac Fleet Director ELD Data Into RapidLog.

Teletrac Fleet Director:

  • Arguments:
    • /provider (Teletrac_FleetDirector)
    • /companycode (RLCompany Code)
    • /accountid (Teletrac_FleetDirector Account ID)
    • /username (Teletrac_FleetDirector Username)
    • /password (Teletrac_FleetDirector Password)
    • /daysback (defaults to 1)
    • /from (only use when pulling a specific date range – 2 week max)
    • /to (only use when pulling a specific date range – 2 week max)

  • Advanced Arguments:
    • /debug 1
      • /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
    • /ui 1
      • /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
    • /fm 1
      • /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
    • /pause 1
      • /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.

  • C:\Windows\RL5.ini Settings (optional):
    • [Directories]
      EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
    • Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode

  • Example BAT File for All Companies and Providers (prefered method):
    • “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI

  • Example BAT File for a Single Company and Provider:
    • “C:\Program Files (x86)\RapidLog\EOBRDownloader.exe” /provider Teletrac_FleetDirector /companycode MYRLCOMPANY /accountid Teletrac_FleetDirectorAccountid /username Teletrac_FleetDirectorUsername /password Teletrac_FleetDirectorPass /daysback 14
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
      “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

  1. Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
  2. Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
    • Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
  3. Open Notepad and setup the download, import and audit.  Save that file as a .bat file.
  4. Open Task Scheduler and schedule the .bat file to run once or twice daily.